Jump to: navigation, search

LimeNET Micro

Revision as of 07:35, 25 February 2021 by ZydrunasTamosevicius (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1 LimeNET-Micro Board

LimeNET Micro makes deploying wireless networks more accessible than ever before, by extending the LimeNET line of integrated hardware solutions via an ultra-low cost platform that is capable of supporting narrowband systems, such as GSM and IoT wireless standards, in a stand-alone configuration. LimeNET-Micro v2.1 board

LimeNET-Micro v2.1

2 Features and Specifications

Feature Description
RF Transceiver Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel MAX 10 (10M16SAU169C8G 169-UBGA)
Raspberry Pi Raspberry Pi CM3(L)
USB 2.0 controller FTDI FT601 (connects FPGA to USB2.0 HUB)
Oscillator Rakon U7475LF @30.72MHz
Continuous frequency range 10MHz - 3.5 GHz
Bandwidth Up to 10 MHz
RF connection 2 SMA connectors (2 TRX)
Power Output (CW) Up to 10 dbm
Power Supply Via PoE, external 5V DC connector or microUSB port
Status indicators Programmable LEDs
Dimensions without connectors 125mm x 65mm

3 Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.

4 Documentation

5 USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

6 Software

7 FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

8 Board Design Files

Here are links to the schematic, PCB project and BOM:

LimeNET-Micro 2.1

9 Additional Components

Here is a list of additional components to be used with LimeNET-Micro board.