Reference Development Kit

About

The Reference Development Kit is comprised of three individual hardware devices: the Myriad-RF 1, the DE0-Nano Interface Board, and the Zipper Interface Board. The Myriad-RF 1 communicates with one of these two boards via the Radio Frequency Digital Input Output (RFDIO) interface.

Myriad-RF 1

The Myriad-RF 1 is a low cost universal radio development platform, based on the flexible, multi-standard LMS6002D transceiver. It enables developers to implement a wide variety of wireless communication applications. It is designed to be used with either the Digital Interface Board or the Zipper Interface Adapter.

DE0-Nano Interface Board

The DE0-Nano Interface Board allows the Myriad-RF 1 to be connected to the DE0-Nano FPGA Development System, adding radio functionality to the system. It cannot be used with other FPGA development systems; for anything other than the DE0-Nano FPGA Development System, the Zipper Interface Board should be used instead.

Zipper Interface Board

The Zipper Interface Board allows the Myriad-RF 1 to be connected to any FPGA development system supporting the High-Speed Mezzanine Card (HSMC) or FPGA Mezzanine Card (FMC) standards, adding radio functionality to the system. The multi-platform compatibility of the Zipper Interface Board makes it suitable for a wide range of FPGA development systems from manufacturers including Altera and Xilinx.

RFDIO Interface

The RFDIO Interface provides high-speed connectivity to FPGA-based carrier boards, including the Digital Interface Board and the Zipper Interface Board of the Reference Development Kit. It is based on the Hirose 0.5mm-pitch, 80-position surface-mount connector, and ensures interoperability between carrier boards and RF cards. The female connector is located on the motherboard, while the male connector is located on the daughterboard.

See Also

• Myriad-RF 1
• DE0-Nano Interface Board
• Zipper Interface Board
• RFDIO Interface
• Reference Development Kit Project Page