LimeNET Micro: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
(Created page with "''Stub.'' {{Community}}")
 
 
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
''Stub.''
== LimeNET-Micro Board ==
 
LimeNET Micro makes deploying wireless networks more accessible than ever before, by extending the LimeNET line of integrated hardware solutions via an ultra-low cost platform that is capable of supporting narrowband systems, such as GSM and IoT wireless standards, in a stand-alone configuration.
LimeNET-Micro v2.1 board
 
[[File:LimeSDR-Micro_v2.1_board.png|center|550px|LimeNET-Micro v2.1 ]]
 
== Features and Specifications ==
 
{| class="wikitable"
! Feature !! Description
|-
| RF Transceiver || Lime Microsystems LMS7002M MIMO FPRF
|-
| FPGA || Intel MAX 10 (10M16SAU169C8G 169-UBGA)
|-
| Raspberry Pi || Raspberry Pi CM3(L)
|-
| USB 2.0 controller || FTDI FT601 (connects FPGA to USB2.0 HUB)
|-
| Oscillator || Rakon U7475LF @30.72MHz
|-
| Continuous frequency range || 10MHz - 3.5 GHz
|-
| Bandwidth || Up to 10 MHz
|-
| RF connection || 2 SMA connectors (2 TRX)
|-
| Power Output (CW) || Up to 10 dbm
|-
| Power Supply || Via PoE, external 5V DC connector or microUSB port
|-
| Status indicators || Programmable LEDs
|-
| Dimensions || without connectors 125mm x 65mm
|}
 
== Getting Help ==
 
If you have questions, the [https://discourse.myriadrf.org/ MyriadRF Discourse] is a best place to ask for help.
 
== Documentation ==
* [[Getting_Started_with_the_LimeNET-Micro | Getting Started with the LimeNET-Micro]]
* [[LimeNET-Micro_v2.1_hardware_description | LimeNET-Micro v2.1 hardware description]]
* [[LimeNET-Micro_SO-DIMM_Adapter_for_Classic_Raspberry_Pi | LimeNET-Micro SO-DIMM Adapter for Classic Raspberry Pi]]
* [[Connecting_LimeNET-Micro_v2.1_to_USB_Host | Connecting LimeNET-Micro v2.1 to USB Host]]
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks (note that not all examples will work with the Mini, e.g. those using the waveform player)
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.2r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 
== USB Drivers ==
 
'''Windows only''', OSX and Linux users do not need to install drivers for USB support.
Follow driver installation instructions in [[LimeSDR-Mini_driver_installation|Driver Installation Documentation]].
 
== Software ==
 
*[[LimeSuiteGUI|LimeSuiteGUI]]
*[[LimeSDR ExtIO Plugin for HDSDR|LimeSDR ExtIO Plugin for HDSDR]]
*[[Gr-limesdr_Plugin_for_GNURadio|gr-limesdr Plugin for GNURadio]]
*[[PantaHub|PantaHub]]
 
== FPGA Binaries ==
 
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
* FPGA [https://github.com/myriadrf/LimeNet-Micro_GW/blob/FTDI/LimeNET-Micro_bitstreams/LimeNET-Micro_lms7_trx_HW_2.1_auto.rpd gateware]
 
== Board Design Files ==
 
Here are links to the schematic, PCB project and BOM:
 
LimeNET-Micro 2.1
 
* [https://github.com/myriadrf/LimeNET-Micro/blob/master/hardware/2v1/Project%20Outputs%20for%20LimeNet-Micro_2v1-SDR/LimeNET-Micro_2v1-SDR_Schematic_r2.PDF Schematic (PDF)]
* [https://github.com/myriadrf/LimeNET-Micro/blob/master/hardware/2v1 PCB project (Altium project)]
* [https://github.com/myriadrf/LimeNET-Micro/blob/master/hardware/2v1/Project%20Outputs%20for%20LimeNet-Micro_2v1-SDR/BOM/LimeNET-Micro_2v1_SDR_BOMr2.xls BOM (XLS)]
 
== Additional Components ==
 
Here is a list of additional components to be used with LimeNET-Micro board.
* [https://www.raspberrypi.org/products/raspberry-pi-touch-display/ Raspberry Pi Touch Display]
* [https://www.raspberrypi.org/products/camera-module-v2/ Camera Module V2]
* [https://wiki.myriadrf.org/LimeNET-Micro_SO-DIMM_Adapter_for_Classic_Raspberry_Pi LimeNET-Micro SO-DIMM Adapter for Classic Raspberry Pi]
 
 


{{Community}}
{{Community}}

Latest revision as of 06:35, 25 February 2021

LimeNET-Micro Board

LimeNET Micro makes deploying wireless networks more accessible than ever before, by extending the LimeNET line of integrated hardware solutions via an ultra-low cost platform that is capable of supporting narrowband systems, such as GSM and IoT wireless standards, in a stand-alone configuration. LimeNET-Micro v2.1 board

LimeNET-Micro v2.1
LimeNET-Micro v2.1

Features and Specifications

Feature Description
RF Transceiver Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel MAX 10 (10M16SAU169C8G 169-UBGA)
Raspberry Pi Raspberry Pi CM3(L)
USB 2.0 controller FTDI FT601 (connects FPGA to USB2.0 HUB)
Oscillator Rakon U7475LF @30.72MHz
Continuous frequency range 10MHz - 3.5 GHz
Bandwidth Up to 10 MHz
RF connection 2 SMA connectors (2 TRX)
Power Output (CW) Up to 10 dbm
Power Supply Via PoE, external 5V DC connector or microUSB port
Status indicators Programmable LEDs
Dimensions without connectors 125mm x 65mm

Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.

Documentation

USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

Software

FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

Board Design Files

Here are links to the schematic, PCB project and BOM:

LimeNET-Micro 2.1

Additional Components

Here is a list of additional components to be used with LimeNET-Micro board.


 
Introduction
Software
Resources
Other documentation hosted on this wiki: Lime Microsystems
Retrieved from "http://wiki.myriadrf.org/index.php?title=LimeNET_Micro&oldid=2414"