LimeSDR-PCIe
LimeSDR-PCIe Boards
Features and Specifications
| Feature | Description |
|---|---|
| RF Transceiver | Lime Microsystems LMS7002M MIMO FPRF |
| FPGA | Cyclone IV GX (EP4CGX30CF23C7N) |
| PCI Express | x4 (4 lanes) |
| Oscillator | Rakon @ 30.72MHz |
| Continuous frequency range | 100 kHz – 3.8 GHz |
| Bandwidth | 61.44MHz |
| RF connection | 10 U.FL connectors (6 RX, 4 TX) |
| Power Output (CW) | Up to 10dBm |
| Multiplexing | 2×2 MIMO |
| Power Supply | Via PCIe connector or optional external power supply |
| Status indicators | Programmable LEDs |
| Dimensions | 68,9mm x 136,85mm |
Getting Help
If you have questions, the MyriadRF Discourse is a best place to ask for help.
Documentation
- LimeSDR-PCIe v1.2 hardware description - LimeSDR-PCIe v1.2 hardware description
- LimeSDR-PCIe v1.3 hardware description - LimeSDR-PCIe v1.3 hardware description
- Getting Started with LimeSDR-PCIe and LimeSuiteGUI - Using LimeSDR-PCIe board with LimeSuiteGUI software
- Getting Started with LimeSDR-USB and LimeSuiteGUI - Using LimeSDR-USB board with LimeSuiteGUI software
- LimeSDR-USB Quick Test - How to check if LimeSDR-USB is working correctly
- LMS7002M (Mask 1) Transceiver Calibration - LMS7002Mr3 calibration guide, using internal MCU
- LimeSDR Made Simple - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
- LMS7002M Datasheet (PDF) - LMS7002M RF transceiver datasheet
- LMS7002M Programming and Calibration Guide (PDF) - LMS7002M programming and calibration guide
Software
FPGA Binary
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
Board Design Files
Here are links to the schematic, PCB project and BOM:
- LimeSDR-PCIe v1.2 (PDF)
- LimeSDR-PCIe v1.2 PCB project (Altium project)
- LimeSDR-PCIe 1.4v socket version BOM (XLS)
Additional Components
Here is a list of additional components to be used with LimeSDR-PCIe board.
| |||||||||||||||||||||
