Gr-limesdr Plugin for GNURadio

Introduction

LimeSDR is a low cost, open source software defined radio (SDR) platform that can be used to support just about any type of wireless communication standard. This document provides an overview of the installation process and operation of the gr-limesdr plugin for GNU Radio software. Currently this plugin supports LimeSDR-USB and LimeSDR-Mini boards.

Installation

This section covers gr-limesdr plugin installation instructions. Currently plugin supports only Linux platform. Tutorial is based on Ubuntu operating system.

Installing LimeSuite

Visit this link for information on how to install LimeSuite.

Installing GNU Radio

Visit this link for information on how to install GNU Radio.

Installing dependencies

Enter the following command in terminal to install Boost and SWIG:

sudo apt-get install libboost-all-dev swig

Building gr-limesdr from source

Downloading gr-limesdr source

Download gr-limesdr plugin by typing:

git clone https://github.com/myriadrf/gr-limesdr

Building and installing gr-limesdr from source

Enter the following commands in terminal:

cd gr-limesdr/build
cmake ..
make
sudo make install
sudo ldconfig

Now you should reload GNU Radio blocks by restarting GNU Radio or by pressing Reload blocks button in top bar as seen in Figure 1. gr-limesdr blocks appear under LimeSuite category.