Lime Suite

Democratising Wireless Innovation
Revision as of 09:54, 6 June 2024 by AndrewBack (talk | contribs) (→‎Which version should I use?)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

Lime Suite is a collection of software which provides drivers and tools for the LMS7002M transceiver RFIC, along with support for LimeSDR boards which are based on this.

Installing Lime Suite enables many SDR applications to be used with supported hardware, through both the native APIs and provided plug-ins, such as for SoapySDR and GNU Radio.

Versions

There are two major development branches of Lime Suite:

  • Lime Suite NG
  • Classic Lime Suite

The Lime Suite codebase has grown over the years to incorporate many improvements and become the foundation for various SDR boards and modules that utilise Lime chipsets. The software collection has also grown to include numerous examples, utilities — such as for testing and programming firmware/gateware — and plug-ins for applications such as the SoapySDR framework and GNU Octave.

After many years of development it became clear that Lime Suite would benefit from certain architectural changes, such as improved support for boards with more than one transceiver. Furthermore, these improvements would result in breaking API changes, hence it was decided to implement them via a new project, Lime Suite NG (Next Generation).

The original Lime Suite project is now transitioning to maintenance mode, where it will continue to receive critical fixes, new issues and pull requests are still welcomed, and new releases will be made as and when appropriate. However, all architectural improvements, new features and support for new SDR boards will be implemented via Lime Suite NG.

Given the breaking API changes and a desire to ease transition from Lime Suite to Lime Suite NG, the latter has been developed such that it can coexist alongside the former; both Lime Suite variants may be installed at the same time and applications may make use of either one or both.

In addition, Lime Suite NG has a compatibility wrapper, which provides the legacy LMS API and allows applications to be used with the new version largely unmodified. However, it is recommended that applications eventually migrate to using the new SDRDevice API.

For further details, see the blog post Introducing Lime Suite NG.

Which version should I use?

Users with fairly recent hardware have no option but to use Lime Suite NG. This includes:

  • LimeSDR-XTRX
    • And platforms which build on this, such as LimeNET Micro 2.0.
  • LimeSDR-X3

Users with the following older designs may also use Lime suite NG:

At the time of writing (6th June 2024) it is likely that support for older boards will not be as thoroughly tested as support for boards which may only be used with Lime Suite NG. However, feedback is welcomed via the forums, along with issues and PRs via the Github repo.

Those with existing applications developed using the Classic Lime Suite API (LMS API) may continue to use this for the time being, either via Classic Lime Suite, or Lime Suite NG and the LMS API wrapper.

However, for new applications it is recommended to use the new Lime Suite NG native (SDRDevice) API. Furthermore, developers of existing applications should plan to migrate to the new SDRDevice API in due course, as the compatibility wrapper will not be maintained indefinitely and Classic Lime Suite will not receive new features or be extended to provide support for new LimeSDR boards and LimeNET systems.

Lime Suite NG

Please see the dedicated Lime Suite NG documentation.

Classic Lime Suite

This wiki page will guide users through available binary packages, obtaining dependencies, compiling the suite, basic testing with hardware, and upgrading firmware.

Please note that you should either install Lime Suite via a pre-built package/installer (2) or build it from source (3) and not do both.

Do not attempt to use Classic Lime Suite with a LimeSDR XTRX board, LimeNET Micro 2.0 or LimeSDR X3 board!

Supported hardware

Installers and packages

We have support for a select number of platforms and package managers. If your platform isn't supported, follow the next sections for getting the dependencies and building LimeSuite.

Note: either install Lime Suite via a package/installer or source code and do not do both!

Ubuntu PPA

The drivers PPA for Ubuntu has a recent build of LimeSuite: 

sudo add-apt-repository -y ppa:myriadrf/drivers
sudo apt-get update
sudo apt-get install limesuite liblimesuite-dev limesuite-udev limesuite-images
sudo apt-get install soapysdr-tools soapysdr-module-lms7

#soapysdr-tools use to be called just soapysdr on older packages
sudo apt-get install soapysdr soapysdr-module-lms7

We currently package for Ubuntu releases:

  • 22.04

Windows

LimeSuite is bundled with the PothoSDR development environment to use supported hardware in an ecosystem of SDR applications like GQRX, Pothos, CubicSDR, and GNU Radio. However, at the time of writing (6th June 2024) this had not been updated in ~3 years, hence will have bundled an old version of Lime Suite with no support for LimeSDR Mini 2.0 boards.

The excellent SDR Console software is recommended as a general purpose applications for amateur radio and monitoring etc.

OSX homebrew

The pothosware homebrew tap has a build recipe for LimeSuite. Also checkout the dholm homebrew tap for other SDR related software. To install LimeSuite: 

brew tap pothosware/homebrew-pothos
brew update
brew install limesuite

FreeBSD

FreeBSD "Port" for LimeSuite exists that automates the build, install, and packaging process. You can either build a package yourself with different options or use the default binary package. You need to be logged in as root to install packages.

To install the default system provided package: 

pkg install limesuite

To build the port yourself: 

cd /usr/ports/comms/limesuite
make config
make install
make package ; pkg install work/pkg/<your_package_is_here>

Building from source

Note: either install Lime Suite via a package/installer or source code and do not do both!

Get the dependencies

Before building LimeSuite from source, several dependencies must be installed. However, the dependencies required change based on how much of the suite will be used. LimeSuite will automatically try and build all components that it can satisfy the dependencies for. The following table is a guide to the the requirements for various components.

Component Dependencies Notes
Build system Git & CMake
Core library sqlite3 Has embedded copy for windows
LMS7 GUI wx widgets & OpenGL Has embedded GL for windows
LimeSDR libusb 1.0/CyAPI Use CyAPI for windows
NovenaRF7 i2c and spi dev Linux only device
SoapyLMS7 SoapySDR SDR app ecosystem support
Ubuntu
#packages for soapysdr available at myriadrf PPA
sudo add-apt-repository -y ppa:myriadrf/drivers
sudo apt-get update

#install core library and build dependencies
sudo apt-get install git g++ cmake libsqlite3-dev

#install hardware support dependencies
sudo apt-get install libsoapysdr-dev libi2c-dev libusb-1.0-0-dev

#install graphics dependencies
sudo apt-get install libwxgtk3.0-dev freeglut3-dev
Other Linux distributions

Ubuntu derivatives should be able to use the same instructions above.

Other distributions, e.g. RPM-based, will not be able use the myriadrf/drivers PPA, and O/S packaged dependencies may be different versions and use slightly different naming. However, it should be possible to use the above as a guide and it is likely that, at the most, SoapySDR would have to be built from source.

Windows

Users building LimeSuite on windows will need a recent visual studio compiler, preferable 2015. Other dependencies can be obtained from the following download links:

FreeBSD

FreeBSD "Port" for LimeSuite exists that automates the build, install, and packaging process for you. 

cd /usr/ports/comms/limesuite
make config
make install


Building LimeSuite

Unix makefiles

The following commands will clone the LimeSuite repository, configure the project using CMake, build the project, and install it. The output of the cmake command will show enabled and disabled components. Pay careful attention to this before building with make. 

git clone https://github.com/myriadrf/LimeSuite.git
cd LimeSuite
git checkout stable
mkdir builddir && cd builddir
cmake ../
make -j4
sudo make install
sudo ldconfig

Linux-only post install step: Install the udev rules to enable non-root users to access usb-based devices like the LimeSDR: 

cd LimeSuite/udev-rules
sudo ./install.sh
Visual Studio

After installing the dependencies, open a cmd prompt and run the following command to clone the repository: 

git clone https://github.com/myriadrf/LimeSuite.git

Complete command line example with cmake for MSVC 2015 64-bit (your dependency directories may vary): 

cd LimeSuite
git checkout stable
mkdir builddir
cd builddir

cmake ../ -G "Visual Studio 14 2015 Win64" ^
    -DWX_ROOT_DIR=C:/wxWidgets-3.1.0 ^
    -DwxWidgets_ROOT_DIR=C:/wxWidgets-3.1.0 ^
    -DwxWidgets_LIB_DIR=C:/wxWidgets-3.1.0/lib/vc140_x64_lib ^
    -DFX3_SDK_PATH="C:/EZ-USB FX3 SDK/1.3" ^
    -DSoapySDR_DIR=C:/PothosSDR

cmake --build . --config Release

#installs files to CMAKE_INSTALL_PREFIX
cmake --build . --config Release --target install

Or use cmake-gui to configure and generate the visual studio project solution. After generating, open the Visual Studio solution file and run the build target.

Hardware notes

LimeSDR-USB

The following post-install tasks are designed to get users up and running with the LimeSDR USB 3.0 device. Lets check that any necessary drivers are installed and that the LimeSuite utilities can find the LimeSDR attached to your system. We will also cover using the LMS7 GUI to update the firmware and FPGA images stored in the board's flash memory.

USB driver

Windows only, OSX and Linux users do not need to install drivers for USB support. Download the LimeSDR USB driver and unzip the package. LimeSDR should appear as an unrecognised device in the device manager. Use the device properties dialogue to specify the path to the LimeSDR USB drivers directory. Once the proper directory is specified, the driver installation should complete successfully.

Device enumeration

Open the lms7suite GUI and check for the LimeSDR in the connection settings dialogue:

From the command line run LimeUtil to get a list of available devices: 

#make sure that STREAM is one of the available connections
LimeUtil --info

#now run LimeUtil with --find to locate devices on the system
LimeUtil --find

#Example print output from LimeUtil
  * [module=STREAM, media=USB, name=USB 3.0 (LimeSDR-USB), addr=241:1204]

Similarly, when working with SDR ecosystem applications, its also good to verify that the LimeSDR can be found by SoapySDRUtil: 

#make sure that lime is one of the available factories 
SoapySDRUtil --info

#now run SoapySDRUtil with --find to locate devices on the system
SoapySDRUtil --find="driver=lime"

#Example print output from LimeUtil
Found device 0
  addr = 241:1204
  driver = lime
  media = USB
  module = STREAM
  name = USB 3.0 (LimeSDR-USB)
Flashing images

You may need to update the FX3 firmware or FPGA bitstream stored in the flash memory of the LimeSDR. Using the programming dialogue, LimeSuiteGUI can automatically download and flash the correct images on the LimeSDR.

 
Introduction
Software
Resources
Other documentation hosted on this wiki: Lime Microsystems
Retrieved from "http://wiki.myriadrf.org/index.php?title=Lime_Suite&oldid=2439"