View source for Connecting LimeNET-Micro v2.1 to USB Host

= Introduction =

LimeNET-Micro v2.1 can be connected to USB2.0 host and used as a Software Defined Radio like [https://wiki.myriadrf.org/LimeSDR-Mini LimeSDR-Mini] but with reduced sample rate due to USB2.0 connection. 


= Quick start = 

* Remove '''J14''' and install '''J18''' jumper.  For additional info see chapter [https://wiki.myriadrf.org/LimeNET-Micro_v2.1_hardware_description#USB_subsystem 3.3 USB subsystem] of [https://wiki.myriadrf.org/LimeNET-Micro_v2.1_hardware_description  LimeNET-Micro v2.1 hardware description].
* Set power selection jumper '''J27''' to "A-USB external" position. Note that in application where LimeNET-Micro v2.1 board requires more power than USB2.0 can supply external power supply has to be used. For additional info for power options see chapter [https://wiki.myriadrf.org/LimeNET-Micro_v2.1_hardware_description#Power_Distribution 3.12 Power distribution] of [https://wiki.myriadrf.org/LimeNET-Micro_v2.1_hardware_description  LimeNET-Micro v2.1 hardware description].
* Connect microUSB cable to '''J15''' connector.
* Install drivers, see chapter [https://wiki.myriadrf.org/LimeNET_Micro#USB_Drivers 5 USB Drivers ]
* Connect to software, see chapter [https://wiki.myriadrf.org/LimeNET_Micro#Software 6 software]


[[File:LimeNET-Micro_v2.1_diagrams v05 USB2 Host.png|center|thumb|550px| Connecting LimeNET-Micro v2.1 to USB host ]]