LimeSDR-USB Board Programming

Democratising Wireless Innovation
Revision as of 08:32, 30 August 2017 by ZydrunasTamosevicius (talk | contribs) (Created page with "== LimeSDR-USB Board Programming == This document describes how to program LimeSDR-USB board using LimeSuiteGUI and Cypress (for FX3 MCU only) software. == Updating FX3 Fir...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

LimeSDR-USB Board Programming

This document describes how to program LimeSDR-USB board using LimeSuiteGUI and Cypress (for FX3 MCU only) software.


Updating FX3 Firmware using LimeSuiteGUI

The firmware of FX3 MCU contains a functionality which enables to program FLASH memory FX3 MCU boots up from. In this case FX3 USB controller firmware can be updated using “LimeSuiteGUI” software, when FX3 MCU can boot from FLASH memory.

To call FPGA programing function, launch LimeSuiteGUI and connect to the board (see “3.1 Launching LimeSuiteGUI and connecting to the board” section for more information). Then go to Modules from main menu and select Programing form the drop down menu, as shown in Figure 1.