LimeSDR-Mini driver installation: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
(Created page with "=Driver installation guide= To install D3XX drivers for an FTDI device under Windows 7, 8, 8.1 and 10, follow the instructions given below: Connect the device to a spare USB p...")
 
No edit summary
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
=Driver installation guide=
=Driver installation guide=
To install D3XX drivers for an FTDI device under Windows 7, 8, 8.1 and 10, follow the instructions given below:
To install D3XX drivers for an FTDI device under Windows 7, 8, 8.1 and 10, follow the instructions given below:
Connect the device to a spare USB port on your PC.
Connect the device to a spare USB port on your PC.


=Manual installation=
=Manual installation=
If no suitable driver is automatically found via Windows Update, then user should manually install the driver. To manually install the driver, follow the procedure given below.  
If no suitable driver is automatically found via Windows Update, then user should manually install the driver. To manually install the driver, follow the procedure given below.  


The D3XX Drivers may be downloaded from the following link – http://www.ftdichip.com/Drivers/D3XX.htm Press the Windows Start button to bring up the start menu and select ‘Control Panel’.
The D3XX Drivers may be downloaded from the following link – http://www.ftdichip.com/Drivers/D3XX.htm Press the Windows Start button to bring up the start menu and select ‘Control Panel’.
[[File:LimeSDR-Mini_drivers_start.png|thumb|center|640px|Figure 1. Windows Start Menu ]]
From the Control Panel window select “Device Manager”.
   
   
Figure 10 Windows Start Menu
[[File:LimeSDR-Mini_drivers_control_panel.png|thumb|center|640px|Figure 2. Control Panel ]]
From the Control Panel window select “Device Manager”.
 


In the Device Manager window there will be a device under Other Devices with a yellow warning symbol to indicate a problem i.e. no driver installed. The text next to this device will depend on the device attached. In this example the device was a “LimeSDR Mini”.
Figure 11 Device Manager Window
In the Device Manager window there will be a device under Other Devices with a yellow warning symbol to indicate a problem i.e. no driver installed. The text next to this device will depend on the device attached. In this example the device was a “LimeSDR Mini”.


[[File:LimeSDR-Mini_drivers_device_manager.png|thumb|center|640px|Figure 3. Device Manager Window with “LimeSDR Mini entry” ]]
   
   
Figure 12 Device Manager Window with “LimeSDR Mini entry”


Right click on the other device (LimeSDR Mini) to bring up a menu as shown below.
Right click on the other device (LimeSDR Mini) to bring up a menu as shown below.


[[File:LimeSDR-Mini_drivers_device_manager_update.png|thumb|center|640px|Figure 4. Device Manager Window > Update Driver Software Menu ]]
Figure 13 Device Manager Window with FTDI Device Driver Entry
 


From the displayed menu, select “Update Driver Software...”
From the displayed menu, select “Update Driver Software...”
This then displays the option for an automatic search or a manual search.
This then displays the option for an automatic search or a manual search.


[[File:LimeSDR-Mini_drivers_update.png|thumb|center|640px|Figure 5. Update Driver Software Search Window]]
Figure 14 Update Driver Software Search Window
 


Select the second option to browse manually.
Select the second option to browse manually.


[[File:LimeSDR-Mini_drivers_search.png|thumb|center|640px|Figure 6. Update Driver Software > Manual Location Selection]]
Figure 15 Update Driver Software > Manual Location Selection
 


In the address box put the exact location where the drivers have been saved to. This may be on a CD or in a folder on the PC. It is not necessarily the exact same location as shown in the screenshot. The drivers could have been saved anywhere of the users choice. Upon entering the address, click “NEXT” to start the installation.
In the address box put the exact location where the drivers have been saved to. This may be on a CD or in a folder on the PC. It is not necessarily the exact same location as shown in the screenshot. The drivers could have been saved anywhere of the users choice. Upon entering the address, click “NEXT” to start the installation.


A “Windows Security” dialog box may be displayed. Click Install to proceed with the installation.
A “Windows Security” dialog box may be displayed. Click Install to proceed with the installation.


 
Figure 16 Windows Security Dialog box
[[File:LimeSDR-Mini_drivers_security.png|thumb|center|640px|Figure 7. Windows Security Dialog box]]
 


The installation progress bar is displayed.
The installation progress bar is displayed.


[[File:LimeSDR-Mini_drivers_progress.png|thumb|center|640px|Figure 8. FTDI D3XX Driver Installation Progress Bar]]
   
   
Figure 17 FTDI D3XX Driver Installation Progress Bar


Upon successful installation, a window indicating the same is displayed.
Upon successful installation, a window indicating the same is displayed.


[[File:LimeSDR-Mini_drivers_finished.png|thumb|center|640px|Figure 9.  FTDI D3XX Driver Installations Complete Message Window ]]
   
   
Figure 18 FTDI D3XX Driver Installation Progress Bar


Click on the Close button to go back to the Device Manager window.
Click on the Close button to go back to the Device Manager window.


[[File:LimeSDR-Mini_drivers_device_manager_updated.png|thumb|center|640px|Figure 10. Device Manager Window with updated FTDI D3XX Driver entry] .png|thumb|center|640px|Figure 10. Device Manager Window with updated FTDI D3XX Driver entry]]
Figure 19 Device Manager Window with updated FTDI D3XX Driver entry
 


This time the Device Manager does not display the “FTDI SuperSpeed-FIFO Bridge” under “Other devices”. Instead an entry for FTDI FT601 USB 3.0 Bridge Device
This time the Device Manager does not display the “FTDI SuperSpeed-FIFO Bridge” under “Other devices”. Instead an entry for FTDI FT601 USB 3.0 Bridge Device
under “Universal Serial Bus controllers” is shown, which indicates that the installation is successful. The device is now ready for use.
under “Universal Serial Bus controllers” is shown, which indicates that the installation is successful. The device is now ready for use.
 
{{Community}}

Latest revision as of 13:48, 6 April 2018

Driver installation guide

To install D3XX drivers for an FTDI device under Windows 7, 8, 8.1 and 10, follow the instructions given below: Connect the device to a spare USB port on your PC.

Manual installation

If no suitable driver is automatically found via Windows Update, then user should manually install the driver. To manually install the driver, follow the procedure given below.

The D3XX Drivers may be downloaded from the following link – http://www.ftdichip.com/Drivers/D3XX.htm Press the Windows Start button to bring up the start menu and select ‘Control Panel’.

Figure 1. Windows Start Menu


From the Control Panel window select “Device Manager”.

Figure 2. Control Panel


In the Device Manager window there will be a device under Other Devices with a yellow warning symbol to indicate a problem i.e. no driver installed. The text next to this device will depend on the device attached. In this example the device was a “LimeSDR Mini”.

Figure 3. Device Manager Window with “LimeSDR Mini entry”


Right click on the other device (LimeSDR Mini) to bring up a menu as shown below.

Figure 4. Device Manager Window > Update Driver Software Menu


From the displayed menu, select “Update Driver Software...” This then displays the option for an automatic search or a manual search.

Figure 5. Update Driver Software Search Window


Select the second option to browse manually.

Figure 6. Update Driver Software > Manual Location Selection


In the address box put the exact location where the drivers have been saved to. This may be on a CD or in a folder on the PC. It is not necessarily the exact same location as shown in the screenshot. The drivers could have been saved anywhere of the users choice. Upon entering the address, click “NEXT” to start the installation.

A “Windows Security” dialog box may be displayed. Click Install to proceed with the installation.


Figure 7. Windows Security Dialog box


The installation progress bar is displayed.

Figure 8. FTDI D3XX Driver Installation Progress Bar


Upon successful installation, a window indicating the same is displayed.

Figure 9. FTDI D3XX Driver Installations Complete Message Window


Click on the Close button to go back to the Device Manager window.

Figure 10. Device Manager Window with updated FTDI D3XX Driver entry


This time the Device Manager does not display the “FTDI SuperSpeed-FIFO Bridge” under “Other devices”. Instead an entry for FTDI FT601 USB 3.0 Bridge Device under “Universal Serial Bus controllers” is shown, which indicates that the installation is successful. The device is now ready for use.