Getting Started with LimeSDR-USB and LimeSuiteGUI

Launching LimeSuiteGUI and connecting to the board

First of all, connect LimeSDR-USB board to PC USB3.0 socket. Please go Driver Installation Documentation to see how to install OS drivers so your PC can see LimeSDR-USB board. In the provided USB Flash there is a folder GUI in which you will find LimeSuiteGUI.exe file (or just download the software from here). Open it.

Figure 1. Opening LimeSuiteGUI.exe file

To launch LimeSuiteGUI application go to menu and select: Options -> Connection Settings as shown in Figure 2.

Figure 2. Opening connection settings

Select LimeSDR-USB board as shown in Figure 3 and press Connect.

Figure 3. LimeSuiteGUI select ports

Loading and saving register settings

In order to load settings, click button Open as shown in Figure 4.

Figure 4. Opening LimeSuiteGUI settings file

Select .ini setting file and click Open as shown in Figure 5.

Figure 5. Selecting LimeSuiteGUI settings file

Then click GUI --> Chip button as shown in Figure 6.

Figure 6. Sending LMS7002M settings from GUI to LimeSDR board

If you want load all LMS7002M settings from LimeSDR-USB to GUI, then click button Chip-->GUI as shown in Figure 7.

Figure 7. Sending LMS7002M settings from LimeSDR-USB to GUI