LimeSDR-USB hardware description: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
No edit summary
Line 5: Line 5:
The LimeSDR-USB has two different USB connector versions. LimeSDR-USB 1v4 is micro USB type B connector (socket) based, as shown in Figure 1. LimeSDR-USB 1v4s is a USB type A connector (plug) based, as shown in Figure 2.
The LimeSDR-USB has two different USB connector versions. LimeSDR-USB 1v4 is micro USB type B connector (socket) based, as shown in Figure 1. LimeSDR-USB 1v4s is a USB type A connector (plug) based, as shown in Figure 2.


[[File:LimeSDR_1v4.png|center|550px|frame|Figure 1. TX spectral tones looking at the TX output. Here: (1) – TX Wanted Signal; (2) – TX LO Leakage; (3) – TX IQ Image.]]
[[File:LimeSDR_1v4.png|center|250px|frame|Figure 1. LimeSDR-USB 1v4 – micro USB type B connector board]]

Revision as of 11:26, 23 August 2017

LimeSDR-USB Board Key Features

The LimeSDR-USB development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Altera’s Cyclone IV FPGA and Lime Microsystems transceiver.

The LimeSDR-USB has two different USB connector versions. LimeSDR-USB 1v4 is micro USB type B connector (socket) based, as shown in Figure 1. LimeSDR-USB 1v4s is a USB type A connector (plug) based, as shown in Figure 2.

Figure 1. LimeSDR-USB 1v4 – micro USB type B connector board
Retrieved from "http://wiki.myriadrf.org/index.php?title=LimeSDR-USB_hardware_description&oldid=1211"