Jump to: navigation, search

Osmocom GSM

Revision as of 18:49, 28 November 2016 by AndrewBack (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page details how to build an Osmocom GSM Network-in-the-Box (NITB) configuration that supports LimeSDR.

1 Dependencies

1.1 Packaged

Packaged dependencies can be installed with:

<syntaxhighlight lang="bash"> $ sudo apt-add-repository ppa:george-edison55/cmake-3.x $ sudo apt-add-repository ppa:myriadrf/drivers</syntaxhighlight>

$ sudo apt-get update

$ sudo apt-get install build-essential git cmake python-mako libsqlite3-dev libboost-all-dev libmnl-dev libssl-dev libpcap-dev libi2c-dev libusb-1.0-0-dev libsoapysdr-dev autoconf libtool libpcsclite-dev libortp-dev libdbi-dev libdbd-sqlite3

1.2 Lime Suite

At the present time Lime Suite should be built from source, instead of using packages. See the wiki page for details.

1.3 UHD

At the present time UHD should be built from source, instead of using packages.

$ git clone https://github.com/EttusResearch/uhd $ cd uhd/host $ git checkout maint $ mkdir build $ cd build $ cmake ../ $ make $ sudo make install $ sudo ldconfig

1.4 SoapyUHD

$ git clone https://github.com/pothosware/SoapyUHD $ cd SoapyUHD $ mkdir build $ cd build $ cmake .. $ make $ sudo make install $ sudo ldconfig

2 Osmocom software

2.1 OpenBSC, OsmoBTS and dependencies

Tested commit (66af97ce0760c0c015b2bc5c8c3290345571b122).

$ git clone https://github.com/fairwaves/osmo-combo $ cd osmo-combo $ git submodule init $ git submodule update $ ./apply_patches.sh static-build $ sudo make

2.2 OsmoTRX

Tested commit (d22657a26d22d265cfeb57636a2fbe9c3e9c0f16).

$ git clone https://github.com/myriadrf/osmo-trx $ cd osmo-trx $ autoreconf -i $ ./configure $ make $ sudo make install

3 Configuration

4 Running