LimeSDR Windows Driver Installation: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
(Initial Page Creation)
 
(Added LimeSDR Mini driver section, renumbered LimeSDR USB subsections.)
Line 3: Line 3:
Those using LimeSDR hardware on Linux or macOS can skip this step and move on to [[LimeSDR Firmware Management]] to upgrade the LimeSDR's firmware and gateware.
Those using LimeSDR hardware on Linux or macOS can skip this step and move on to [[LimeSDR Firmware Management]] to upgrade the LimeSDR's firmware and gateware.


==Downloading and Extracting the Driver==
==Installing the LimeSDR Mini Driver==
Download the latest version of the LimeSDR from the Myriad-RF GitHub repository using [https://github.com/myriadrf/Windows-drivers/archive/master.zip this link]. The name of the archive will be Windows-drivers-master.zip. Extract the archive using Windows' built-in archive management or the archive tool of your choice.


==Loading Device Manager==
The LimeSDR Mini uses an industry-standard FTDI chip for USB communication. In most cases, this driver is already available on Windows and the LimeSDR Mini can be used without manual installation.
Connect your LimeSDR to your host PC, if you have not already done so. Wait a few seconds for Windows to detect the device, then click on the Start Menu or press the Super key on your keyboard and type "Device Manager" followed by the Enter Key.


In the list of device categories in the Device Manager window, expand "Other devices" and find "LimeSDR-USB" or "LimeSDR Mini" in the list. Right-click on this device then left-click on "Update Driver Software" to load the driver installation dialogue.
In the event that the default FTDI driver provided with your Windows installation does not operate correctly, please install the latest version as detailed below.
 
===Downloading and Extracting the Driver===
Download the latest version of the FTDI driver from [http://www.ftdichip.com/Drivers/D3XX.htm the FTDI website]. The name of this archive will depend on the version available, but should begin "FTD3XXDriver_WHYQLCertified". Extract the archive using Windows' built-in archive management or the tool of your choice.
 
===Loading Device Manager===
Connect your LimeSDR Mini to your host PC, if you have not already done so. Wait a few seconds for Windows to detect the device, then click on the Start Menu or press the Super key on your keyboard and type "Device Manager" followed by the Enter Key.
 
In the list of device categories in the Device Manager window, expand "Other devices" and find "LimeSDR Mini" in the list. Right-click on this device then left-click on "Update Driver Software" to load the driver installation dialogue.
 
[[File:LimeSDR-Mini drivers device manager update.png|thumb|center|600px|]]
 
===Manually Installing the Driver===
To ensure that Windows loads the correct driver, choose "Browse my computer for driver software" from the window that appears. Click the "Browse" button, then browse to the folder to which you extracted the driver archive followed by the sub-folder which matches your Windows version:
 
* Windows 7
* Windows 8
* Windows 8.1
* Windows 10
 
If you have a 64-bit Windows installation, first navigate to the "x64" subfolder followed by the folder which matches your Windows version.
 
[[File:LimeSDR-Mini drivers search.png|thumb|center|600px|]]
 
Click "OK", then click "Next" to begin driver installation. A security dialogue may appear; if so, grant permission for the installation to continue. After a few seconds, Windows will display a dialogue confirming that the driver has been installed.
 
[[File:LimeSDR-Mini drivers finished.png|thumb|center|600px|]]
 
===Confirming Driver Installation===
To confirm that the driver has been successfully loaded, click "Close" to return to the main Device Manager window. Expand the device category labelled "Universal Serial Bus controllers" and find "FTDI FT601 USB 3.0 Bridge Device" in the list; its logo should be a USB connector with no exclamation mark or other warning symbol present.
 
[[File:LimeSDR-Mini_drivers_device_manager_updated.png|thumb|center|600px|]]
 
If the device does not appear, disconnect the LimeSDR Mini from your system and reconnect it to refresh Device Manager.
 
==Installing the LimeSDR USB Driver==
 
The LimeSDR USB uses a special chip, known as the FX3, to handle USB communications. This requires the installation of a specific driver, detailed below.
 
===Downloading and Extracting the Driver===
Download the latest version of the LimeSDR USB driver from the Myriad-RF GitHub repository using [https://github.com/myriadrf/Windows-drivers/archive/master.zip this link]. The name of the archive will be "Windows-drivers-master.zip". Extract the archive using Windows' built-in archive management or the archive tool of your choice.
 
===Loading Device Manager===
Connect your LimeSDR USB to your host PC, if you have not already done so. Wait a few seconds for Windows to detect the device, then click on the Start Menu or press the Super key on your keyboard and type "Device Manager" followed by the Enter Key.
 
In the list of device categories in the Device Manager window, expand "Other devices" and find "LimeSDR-USB" in the list. Right-click on this device then left-click on "Update Driver Software" to load the driver installation dialogue.


[[File:LimeSDR-USB_1v4_Drivers_Update_Software.png|thumb|center|600px|]]
[[File:LimeSDR-USB_1v4_Drivers_Update_Software.png|thumb|center|600px|]]


==Manually Installing the Driver==
===Manually Installing the Driver===
To ensure that Windows loads the correct driver, choose "Browse my computer for driver software" from the window that appears. Click the "Browse" button, then browse to the folder to which you extracted the driver archive followed by the sub-folder which matches your Windows version:
To ensure that Windows loads the correct driver, choose "Browse my computer for driver software" from the window that appears. Click the "Browse" button, then browse to the folder to which you extracted the driver archive followed by the sub-folder which matches your Windows version:


Line 25: Line 68:
[[File:LimeSDR-USB_1v4_Drivers_Select.png|thumb|center|600px|]]
[[File:LimeSDR-USB_1v4_Drivers_Select.png|thumb|center|600px|]]


Click "OK", then click "Next" to begin driver installation. After a few seconds, Windows will display a dialogue confirming that the driver has been installed.
Click "OK", then click "Next" to begin driver installation. A security dialogue may appear; if so, grant permission for the installation to continue. After a few seconds, Windows will display a dialogue confirming that the driver has been installed.


[[File:LimeSDR-USB_1v4_Drivers_Succesfull_Inst.png|thumb|center|600px|]]
[[File:LimeSDR-USB_1v4_Drivers_Succesfull_Inst.png|thumb|center|600px|]]


==Confirming Driver Installation==
===Confirming Driver Installation===
To confirm that the driver has been successfully loaded, click "Close" to return to the main Device Manager window. Expand the device category labelled "Universal Serial Bus controllers" and find "Myriad-RF LimeSDR-USB" or "Myriad-RF LimeSDR Mini" in the list; its logo should be a USB connector with no exclamation mark or other warning symbol present.
To confirm that the driver has been successfully loaded, click "Close" to return to the main Device Manager window. Expand the device category labelled "Universal Serial Bus controllers" and find "Myriad-RF LimeSDR-USB" in the list; its logo should be a USB connector with no exclamation mark or other warning symbol present.


[[File:LimeSDR-USB_1v4_Drivers_Device_Man_Succ.png|thumb|center|600px|]]
[[File:LimeSDR-USB_1v4_Drivers_Device_Man_Succ.png|thumb|center|600px|]]


If the device does not appear, disconnect the LimeSDR from your system and reconnect it to refresh Device Manager. If using the LimeSDR USB, make sure that both the power and data USB connectors are plugged into your host PC, as inadequate power can cause the LimeSDR USB to fail to operate correctly.
If the device does not appear, disconnect the LimeSDR from your system and reconnect it to refresh Device Manager. Make sure that both the power and data USB connectors are plugged into your host PC, as inadequate power can cause the LimeSDR USB to fail to operate correctly.


==Next Steps==
==Next Steps==

Revision as of 15:27, 12 April 2018

The LimeSDR family of software defined radio boards requires drivers to be installed before it can be used on platforms running the Microsoft Windows family of operating systems. Follow these instructions to download and install the driver before trying to use the LimeSDR for the first time.

Those using LimeSDR hardware on Linux or macOS can skip this step and move on to LimeSDR Firmware Management to upgrade the LimeSDR's firmware and gateware.

Installing the LimeSDR Mini Driver

The LimeSDR Mini uses an industry-standard FTDI chip for USB communication. In most cases, this driver is already available on Windows and the LimeSDR Mini can be used without manual installation.

In the event that the default FTDI driver provided with your Windows installation does not operate correctly, please install the latest version as detailed below.

Downloading and Extracting the Driver

Download the latest version of the FTDI driver from the FTDI website. The name of this archive will depend on the version available, but should begin "FTD3XXDriver_WHYQLCertified". Extract the archive using Windows' built-in archive management or the tool of your choice.

Loading Device Manager

Connect your LimeSDR Mini to your host PC, if you have not already done so. Wait a few seconds for Windows to detect the device, then click on the Start Menu or press the Super key on your keyboard and type "Device Manager" followed by the Enter Key.

In the list of device categories in the Device Manager window, expand "Other devices" and find "LimeSDR Mini" in the list. Right-click on this device then left-click on "Update Driver Software" to load the driver installation dialogue.

Manually Installing the Driver

To ensure that Windows loads the correct driver, choose "Browse my computer for driver software" from the window that appears. Click the "Browse" button, then browse to the folder to which you extracted the driver archive followed by the sub-folder which matches your Windows version:

  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 10

If you have a 64-bit Windows installation, first navigate to the "x64" subfolder followed by the folder which matches your Windows version.

Click "OK", then click "Next" to begin driver installation. A security dialogue may appear; if so, grant permission for the installation to continue. After a few seconds, Windows will display a dialogue confirming that the driver has been installed.

Confirming Driver Installation

To confirm that the driver has been successfully loaded, click "Close" to return to the main Device Manager window. Expand the device category labelled "Universal Serial Bus controllers" and find "FTDI FT601 USB 3.0 Bridge Device" in the list; its logo should be a USB connector with no exclamation mark or other warning symbol present.

If the device does not appear, disconnect the LimeSDR Mini from your system and reconnect it to refresh Device Manager.

Installing the LimeSDR USB Driver

The LimeSDR USB uses a special chip, known as the FX3, to handle USB communications. This requires the installation of a specific driver, detailed below.

Downloading and Extracting the Driver

Download the latest version of the LimeSDR USB driver from the Myriad-RF GitHub repository using this link. The name of the archive will be "Windows-drivers-master.zip". Extract the archive using Windows' built-in archive management or the archive tool of your choice.

Loading Device Manager

Connect your LimeSDR USB to your host PC, if you have not already done so. Wait a few seconds for Windows to detect the device, then click on the Start Menu or press the Super key on your keyboard and type "Device Manager" followed by the Enter Key.

In the list of device categories in the Device Manager window, expand "Other devices" and find "LimeSDR-USB" in the list. Right-click on this device then left-click on "Update Driver Software" to load the driver installation dialogue.

Manually Installing the Driver

To ensure that Windows loads the correct driver, choose "Browse my computer for driver software" from the window that appears. Click the "Browse" button, then browse to the folder to which you extracted the driver archive followed by the sub-folder which matches your Windows version:

  • wxp - Windows XP
  • vista - Windows Vista
  • Win7 - Windows 7
  • Win8 - Windows 8
  • Win81 - Windows 8.1
  • Win10 - Windows 10

Click "OK", then click "Next" to begin driver installation. A security dialogue may appear; if so, grant permission for the installation to continue. After a few seconds, Windows will display a dialogue confirming that the driver has been installed.

Confirming Driver Installation

To confirm that the driver has been successfully loaded, click "Close" to return to the main Device Manager window. Expand the device category labelled "Universal Serial Bus controllers" and find "Myriad-RF LimeSDR-USB" in the list; its logo should be a USB connector with no exclamation mark or other warning symbol present.

If the device does not appear, disconnect the LimeSDR from your system and reconnect it to refresh Device Manager. Make sure that both the power and data USB connectors are plugged into your host PC, as inadequate power can cause the LimeSDR USB to fail to operate correctly.

Next Steps

With the driver installed, you can move on to LimeSDR Firmware Management to learn how to update the firmware and gateware on your LimeSDR.