Jump to: navigation, search

Difference between revisions of "LimeSDR-QPCIe"

(LimeSDR-QPCIe Boards)
(Features and Specifications)
Line 14: Line 14:
 
|-
 
|-
 
| FPGA || Intel Cyclone V, 5CGXFC7D7F31C8N device in 896-pin FBGA package
 
| FPGA || Intel Cyclone V, 5CGXFC7D7F31C8N device in 896-pin FBGA package
 +
|-
 +
| PCIe interface ||PCIe x4 (Gen1)
 
|-
 
|-
 
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
 
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
Line 29: Line 31:
 
| Multiplexing || 4×4 MIMO
 
| Multiplexing || 4×4 MIMO
 
|-
 
|-
| Power Supply || Via PCIe interface or external DCmm
+
| Power Supply || Via PCIe interface or external or PCIe 6-pin and DC power connectors
 
|-
 
|-
 
| Status indicators || Programmable LEDs
 
| Status indicators || Programmable LEDs
 
|-
 
|-
| Dimensions || 1900mm x 1067mm
+
| Dimensions || 190mm x 106.7mm (7.48” x 4.20”)
 
|}
 
|}
 
  
 
== Getting Help ==
 
== Getting Help ==

Revision as of 12:45, 24 May 2018

1 LimeSDR-QPCIe Boards

LimeSDR-QPCIe is software defined radio board based on Lime LMS7002M Field Programmable Radio Frequency (FPRF) transceiver and Altera Cyclone V PFGA, through which apps can be programmed to support any type of wireless standard, e.g. UMTS, LTE, LoRa, GPS, WiFi, Zigbee, RFID, Digital Broadcasting, Radar and many more.

LimeSDR-USB board with Micro USB Type B socket:

LimeSDR-QPCIe v1.2 board

2 Features and Specifications

Feature Description
RF Transceiver 2x Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel Cyclone V, 5CGXFC7D7F31C8N device in 896-pin FBGA package
PCIe interface PCIe x4 (Gen1)
USB 3.0 controller Cypress USB 3.0 CYUSB3014-BZXC
Oscillator  ????
Continuous frequency range 100 kHz – 3.8 GHz
Bandwidth 61.44MHz ???
RF connection 20 U.FL connectors (12 RX, 8 TX)
Power Output (CW) Up to 10dBm
Multiplexing 4×4 MIMO
Power Supply Via PCIe interface or external or PCIe 6-pin and DC power connectors
Status indicators Programmable LEDs
Dimensions 190mm x 106.7mm (7.48” x 4.20”)

3 Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.

4 Documentation


NOT FINISHED !!! ---------

5 USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

6 Software

7 USB3 MCU and FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):


8 Board Design Files

Here are links to the schematic, PCB project and BOM:


9 Additional Components

Here is a list of additional components to be used with LimeSDR-USB board.