Jump to: navigation, search

Difference between revisions of "LimeSDR-QPCIe"

(→‎Documentation)
(→‎Documentation)
 
(16 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
LimeSDR-QPCIe is software defined radio board based on Lime LMS7002M Field Programmable Radio Frequency (FPRF) transceiver and Altera Cyclone V PFGA, through which apps can be programmed to support any type of wireless standard, e.g. UMTS, LTE, LoRa, GPS, WiFi, Zigbee, RFID, Digital Broadcasting, Radar and many more.
 
LimeSDR-QPCIe is software defined radio board based on Lime LMS7002M Field Programmable Radio Frequency (FPRF) transceiver and Altera Cyclone V PFGA, through which apps can be programmed to support any type of wireless standard, e.g. UMTS, LTE, LoRa, GPS, WiFi, Zigbee, RFID, Digital Broadcasting, Radar and many more.
  
−
LimeSDR-USB board with Micro USB Type B socket:
 
 
[[File:LimeSDR-QPCIe_v1.2.png|center|640px|LimeSDR-QPCIe v1.2 board]]
 
[[File:LimeSDR-QPCIe_v1.2.png|center|640px|LimeSDR-QPCIe v1.2 board]]
  
Line 19: Line 18:
 
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
 
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
 
|-
 
|-
−
| Oscillator || ????
+
| Oscillator || U7475LF 30.72MHz
 
|-
 
|-
 
| Continuous frequency range || 100 kHz – 3.8 GHz
 
| Continuous frequency range || 100 kHz – 3.8 GHz
 
|-
 
|-
−
| Bandwidth || 61.44MHz ???
+
| Bandwidth || 61.44MHz
 
|-
 
|-
 
| RF connection || 20 U.FL connectors (12 RX, 8 TX)
 
| RF connection || 20 U.FL connectors (12 RX, 8 TX)
Line 44: Line 43:
 
== Documentation ==
 
== Documentation ==
  
−
* [[LimeSDR-QPCIe_hardware_description | LimeSDR-QPCIe hardware description]] - LimeSDR-QPCIe hardware description
+
* [[LimeSDR-QPCIe_v1.2_hardware_description | LimeSDR-QPCIe v1.2 hardware description]] - LimeSDR-QPCIe hardware description
−
 
+
* [[LimeSDR-QPCIe_driver_installation | LimeSDR-QPCIe driver installation description]] - LimeSDR-QPCIe driver installation description
−
-------- NOT FINISHED !!! ---------
+
* [[LimeSDR-QPCIe_Board_Programming | LimeSDR-QPCIe Board Programming]] - LimeSDR-QPCIe FX3 USB microcontroller and FPGA flashing guide
−
 
+
−
* [[LimeSDR-USB_driver_installation | LimeSDR-USB driver installation description]] - LimeSDR-USB USB driver installation description
+
 
* [[Getting_Started_with_LimeSDR-USB_and_LimeSuiteGUI | Getting Started with LimeSDR-USB and LimeSuiteGUI]] - Using LimeSDR-USB board with LimeSuiteGUI software
 
* [[Getting_Started_with_LimeSDR-USB_and_LimeSuiteGUI | Getting Started with LimeSDR-USB and LimeSuiteGUI]] - Using LimeSDR-USB board with LimeSuiteGUI software
−
* [[LimeSDR-USB_Board_Programming | LimeSDR-USB Board Programming]] - LimeSDR-USB FX3 USB microcontroller and FPGA flashing guide
 
−
 
−
* [[LimeSDR-USB Quick Test|LimeSDR-USB Quick Test]] - How to check if LimeSDR-USB is working correctly
 
−
* [[LimeSDR HF Performance|LimeSDR-USB HF Performance]] - LimeSDR-USB board performance in HF band and RF network modification
 
 
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
 
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
 
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
 
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
−
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
+
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.2r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
  
 
== USB Drivers ==
 
== USB Drivers ==
 
'''Windows only''', OSX and Linux users do not need to install drivers for USB support.
 
'''Windows only''', OSX and Linux users do not need to install drivers for USB support.
−
Follow driver installation instructions in [[LimeSDR-USB_driver_installation|Driver Installation Documentation]].
+
Follow driver installation instructions in [[LimeSDR-QPCIe_driver_installation | LimeSDR-QPCIe driver installation description]].
  
 
== Software ==
 
== Software ==
Line 72: Line 65:
  
 
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
 
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
−
* USB3 MCU [https://github.com/myriadrf/LimeSDR-USB_FX3/blob/master/Debug/LimeSDR-USB_fx3_fw.img firmware]
+
* USB3 MCU [https://github.com/myriadrf/LimeSDR-QPCIe_fx3_fw/blob/master/Debug/LimeSDR-QPCIe_fx3_fw.img firmware]
−
* FPGA [https://github.com/myriadrf/LimeSDR-USB_GW/blob/master/output_files/LimeSDR-USB_lms7_trx_HW_1.4.rbf gateware]
+
* FPGA [https://github.com/myriadrf/LimeSDR-QPCIe_GW gateware]
−
 
+
  
 
== Board Design Files ==
 
== Board Design Files ==
  
 
Here are links to the schematic, PCB project and BOM:
 
Here are links to the schematic, PCB project and BOM:
−
* LimeSDR-USB 1.4v plug version [https://github.com/myriadrf/LimeSDR-USB/blob/master/hardware/plug/1v4/Project%20Outputs%20for%20LimeSDR-USB_1v4_LMS031pad/LimeSDR-USB_1v4_schematic_r7.PDF Schematic (PDF)]
+
* LimeSDR-QPCIe 1.2v [https://github.com/myriadrf/LimeSDR-QPCIe/blob/master/hardware/1v2/Project%20Outputs%20for%20LimeSDR-QPCIe_1v2/LimeSDR-QPCIe_1v2_schematic_r2.PDF Schematic (PDF)]
−
* LimeSDR-USB 1.4v socket version [https://github.com/myriadrf/LimeSDR-USB/blob/master/hardware/socket/1v4/Project%20Outputs%20for%20LimeSDR-USB_1v4s_LMS031pad/LimeSDR-USB_1v4s_schematic_r7.PDF Schematic (PDF)]
+
* LimeSDR-QPCIe 1.2v [https://github.com/myriadrf/LimeSDR-QPCIe/tree/master/hardware/1v2 PCB project (Altium project)]
−
* LimeSDR-USB 1.4v plug version [https://github.com/myriadrf/LimeSDR-USB/tree/master/hardware/plug/1v4 PCB project (Altium project)]
+
* LimeSDR-QPCIe 1.2v [https://github.com/myriadrf/LimeSDR-QPCIe/blob/master/hardware/1v2/Project%20Outputs%20for%20LimeSDR-QPCIe_1v2/BOM/LimeSDR-QPCIe_1v2_BOMr1.xls BOM (XLS)]
−
* LimeSDR-USB 1.4v socket version [https://github.com/myriadrf/LimeSDR-USB/tree/master/hardware/socket/1v4 PCB project (Altium project)]
+
−
* LimeSDR-USB 1.4v plug version [https://github.com/myriadrf/LimeSDR-USB/blob/master/hardware/plug/1v4/Project%20Outputs%20for%20LimeSDR-USB_1v4_LMS031pad/BOM/LimeSDR-USB_1v4_BOMr7.xls BOM (XLS)]
+
−
* LimeSDR-USB 1.4v socket version [https://github.com/myriadrf/LimeSDR-USB/blob/master/hardware/socket/1v4/Project%20Outputs%20for%20LimeSDR-USB_1v4s_LMS031pad/BOM/LimeSDR-USB_1v4s_BOMr7.xls BOM (XLS)]
+
−
 
+
  
 
== Additional Components ==
 
== Additional Components ==
Line 92: Line 80:
 
* [http://uk.farnell.com/ls-research/080-0001/cable-ufl-to-sma-rp-female-bulkhead/dp/2324836 U.FL to SMA adapter cable]
 
* [http://uk.farnell.com/ls-research/080-0001/cable-ufl-to-sma-rp-female-bulkhead/dp/2324836 U.FL to SMA adapter cable]
 
* Tested fans:
 
* Tested fans:
−
** [http://www.digikey.com/product-detail/en/sunon-fans/MB40100V2-000U-A99/259-1565-ND/2757776 MB40100V2-000U-A99]
+
** [https://www.digikey.com/products/en?keywords=HA60151V4-1000U-A99 HA60151V4-1000U-A99]
−
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V1-000U-A99/259-1545-ND/2757809 MC30060V1-000U-A99]
+
  
  
 
{{Community}}
 
{{Community}}

Latest revision as of 12:53, 10 July 2019

1 LimeSDR-QPCIe Boards

LimeSDR-QPCIe is software defined radio board based on Lime LMS7002M Field Programmable Radio Frequency (FPRF) transceiver and Altera Cyclone V PFGA, through which apps can be programmed to support any type of wireless standard, e.g. UMTS, LTE, LoRa, GPS, WiFi, Zigbee, RFID, Digital Broadcasting, Radar and many more.

LimeSDR-QPCIe v1.2 board

2 Features and Specifications

Feature Description
RF Transceiver 2x Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel Cyclone V, 5CGXFC7D7F31C8N device in 896-pin FBGA package
PCIe interface PCIe x4 (Gen1)
USB 3.0 controller Cypress USB 3.0 CYUSB3014-BZXC
Oscillator U7475LF 30.72MHz
Continuous frequency range 100 kHz – 3.8 GHz
Bandwidth 61.44MHz
RF connection 20 U.FL connectors (12 RX, 8 TX)
Power Output (CW) Up to 10dBm
Multiplexing 4×4 MIMO
Power Supply Via PCIe interface or external or PCIe 6-pin and DC power connectors
Status indicators Programmable LEDs
Dimensions 190mm x 106.7mm (7.48” x 4.20”)

3 Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.

4 Documentation

5 USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in LimeSDR-QPCIe driver installation description.

6 Software

7 USB3 MCU and FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

8 Board Design Files

Here are links to the schematic, PCB project and BOM:

9 Additional Components

Here is a list of additional components to be used with LimeSDR-USB board.


 
Introduction
Myriad-RF Community Icon 167x70.jpg
Software
Resources
Other documentation hosted on this wiki: Lime Microsystems
Retrieved from "http://wiki.myriadrf.org/index.php?title=LimeSDR-QPCIe&oldid=2322"