LimeSDR-QPCIe: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 18: Line 18:
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
| USB 3.0 controller || Cypress USB 3.0 CYUSB3014-BZXC
|-
|-
| Oscillator || ????
| Oscillator || U7475LF 30.72MHz
|-
|-
| Continuous frequency range || 100 kHz – 3.8 GHz
| Continuous frequency range || 100 kHz – 3.8 GHz
|-
|-
| Bandwidth || 61.44MHz ???
| Bandwidth || 61.44MHz
|-
|-
| RF connection || 20 U.FL connectors (12 RX, 8 TX)
| RF connection || 20 U.FL connectors (12 RX, 8 TX)
Line 49: Line 49:
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.2r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide



Latest revision as of 11:53, 10 July 2019

LimeSDR-QPCIe Boards

LimeSDR-QPCIe is software defined radio board based on Lime LMS7002M Field Programmable Radio Frequency (FPRF) transceiver and Altera Cyclone V PFGA, through which apps can be programmed to support any type of wireless standard, e.g. UMTS, LTE, LoRa, GPS, WiFi, Zigbee, RFID, Digital Broadcasting, Radar and many more.

LimeSDR-QPCIe v1.2 board
LimeSDR-QPCIe v1.2 board

Features and Specifications

Feature Description
RF Transceiver 2x Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel Cyclone V, 5CGXFC7D7F31C8N device in 896-pin FBGA package
PCIe interface PCIe x4 (Gen1)
USB 3.0 controller Cypress USB 3.0 CYUSB3014-BZXC
Oscillator U7475LF 30.72MHz
Continuous frequency range 100 kHz – 3.8 GHz
Bandwidth 61.44MHz
RF connection 20 U.FL connectors (12 RX, 8 TX)
Power Output (CW) Up to 10dBm
Multiplexing 4×4 MIMO
Power Supply Via PCIe interface or external or PCIe 6-pin and DC power connectors
Status indicators Programmable LEDs
Dimensions 190mm x 106.7mm (7.48” x 4.20”)

Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.

Documentation

USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in LimeSDR-QPCIe driver installation description.

Software

USB3 MCU and FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

Board Design Files

Here are links to the schematic, PCB project and BOM:

Additional Components

Here is a list of additional components to be used with LimeSDR-USB board.