LimeSDR-Mini: Difference between revisions

Democratising Wireless Innovation
Jump to navigation Jump to search
Line 48: Line 48:
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
* [[LimeSDR-Mini-Phase-Noise | LimeSDR-Mini v1.2 phase noise measurements]]


== USB Drivers ==
== USB Drivers ==

Revision as of 13:36, 3 June 2019

LimeSDR-Mini Boards

The LimeSDR-Mini is low-cost software defined radio board. LimeSDR-Mini development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Intel’s MAX 10 FPGA and Lime Microsystems transceiver.

LimeSDR-Mini v1.1 board

LimeSDR-Mini v1.1
LimeSDR-Mini v1.1

Features and Specifications

Feature Description
RF Transceiver Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel MAX 10 (10M16SAU169C8G 169-UBGA)
USB 3.0 controller FTDI FT601
Oscillator Rakon RTX5032A @40.00MHz
Continuous frequency range TBD
Bandwidth TBD
RF connection 2 SMA connectors (1 RX, 1 TX)
Power Output (CW) TBD
Status indicators Programmable LEDs
Dimensions 69mm x 31.4mm


Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.


Documentation

USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

Software

FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

Board Design Files

Here are links to the schematic, PCB project and BOM:

LimeSDR-Mini v1.1

Additional Components

Here is a list of additional components to be used with LimeSDR-Mini board.