Jump to: navigation, search

Difference between revisions of "LimeSDR-Mini"

(FPGA Binaries)
(Documentation)
Line 48: Line 48:
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 +
* [[LimeSDR-Mini-Phase-Noise | LimeSDR-Mini v1.2 phase noise measurements]]
  
 
== USB Drivers ==
 
== USB Drivers ==

Revision as of 14:36, 3 June 2019

1 LimeSDR-Mini Boards

The LimeSDR-Mini is low-cost software defined radio board. LimeSDR-Mini development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Intel’s MAX 10 FPGA and Lime Microsystems transceiver.

LimeSDR-Mini v1.1 board

LimeSDR-Mini v1.1

2 Features and Specifications

Feature Description
RF Transceiver Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel MAX 10 (10M16SAU169C8G 169-UBGA)
USB 3.0 controller FTDI FT601
Oscillator Rakon RTX5032A @40.00MHz
Continuous frequency range TBD
Bandwidth TBD
RF connection 2 SMA connectors (1 RX, 1 TX)
Power Output (CW) TBD
Status indicators Programmable LEDs
Dimensions 69mm x 31.4mm


3 Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.


4 Documentation

5 USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

6 Software

7 FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

8 Board Design Files

Here are links to the schematic, PCB project and BOM:

LimeSDR-Mini v1.1

9 Additional Components

Here is a list of additional components to be used with LimeSDR-Mini board.