Difference between revisions of "LimeSDR-Mini"
(→Additional Components) |
(→Documentation) |
||
| Line 41: | Line 41: | ||
== Documentation == | == Documentation == | ||
| − | * [[LimeSDR-Mini_v1.1_hardware_description | LimeSDR- | + | * [[LimeSDR-Mini_v1.1_hardware_description | LimeSDR-Mini v1.1 hardware description]] - LimeSDR-Mini v1.1 hardware description |
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU | * [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU | ||
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks. | * [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks. | ||
Revision as of 08:49, 28 February 2018
Contents
1 LimeSDR-Mini Boards
The LimeSDR-Mini is low-cost software defined radio board. LimeSDR-Mini development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Intel’s MAX 10 FPGA and Lime Microsystems transceiver.
LimeSDR-Mini v1.1 board
2 Features and Specifications
| Feature | Description |
|---|---|
| RF Transceiver | Lime Microsystems LMS7002M MIMO FPRF |
| FPGA | Intel MAX 10 (10M16SAU169C8G 169-UBGA) |
| USB 3.0 controller | FTDI FT601 |
| Oscillator | Rakon RTX5032A @40.00MHz |
| Continuous frequency range | TBD |
| Bandwidth | TBD |
| RF connection | 2 SMA connectors (1 RX, 1 TX) |
| Power Output (CW) | TBD |
| Status indicators | Programmable LEDs |
| Dimensions | 69mm x 31.4mm |
3 Getting Help
If you have questions, the MyriadRF Discourse is a best place to ask for help.
4 Documentation
- LimeSDR-Mini v1.1 hardware description - LimeSDR-Mini v1.1 hardware description
- LMS7002M (Mask 1) Transceiver Calibration - LMS7002Mr3 calibration guide, using internal MCU
- LimeSDR Made Simple - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks.
- LMS7002M Datasheet (PDF) - LMS7002M RF transceiver datasheet
- LMS7002M Programming and Calibration Guide (PDF) - LMS7002M programming and calibration guide
5 USB Drivers
Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.
6 Software
7 FPGA Binaries
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
- FPGA gateware
8 Board Design Files
Here are links to the schematic, PCB project and BOM:
LimeSDR-Mini v1.1
9 Additional Components
Here is a list of additional components to be used with LimeSDR-Mini board.
- U.FL to SMA adapter cable
- Tested fans:
- MC30060V1-000U-A99
- MC30060V2-000U-A99 (prefered choise)
|
|||||||||||||||||||||
