Jump to: navigation, search

Difference between revisions of "LimeSDR-Mini"

(Additional Components)
 
(5 intermediate revisions by 2 users not shown)
Line 46: Line 46:
 
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
 
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU
 
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks (note that not all examples will work with the Mini, e.g. those using the waveform player)
 
* [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks (note that not all examples will work with the Mini, e.g. those using the waveform player)
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.1r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
+
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.2r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide
 +
* [[LimeSDR-Mini-Phase-Noise | LimeSDR-Mini v1.2 phase noise measurements]]
  
 
== USB Drivers ==
 
== USB Drivers ==
Line 64: Line 65:
  
 
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
 
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
* FPGA [https://github.com/myriadrf/LimeSDR-Mini_GW/blob/master/LimeSDR-Mini_bitstreams/LimeSDR-Mini_lms7_trx_HW_1.1_auto.rpd gateware]
+
* FPGA [https://github.com/myriadrf/LimeSDR-Mini_GW/blob/master/LimeSDR-Mini_bitstreams/LimeSDR-Mini_lms7_trx_HW_1.2_auto.rpd gateware]
  
 
== Board Design Files ==
 
== Board Design Files ==
Line 82: Line 83:
 
* Tested fans:
 
* Tested fans:
 
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V1-000U-A99/259-1545-ND/2757809 MC30060V1-000U-A99]
 
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V1-000U-A99/259-1545-ND/2757809 MC30060V1-000U-A99]
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V2-000U-A99/259-1572-ND/2757810 MC30060V2-000U-A99] (prefered choise)
+
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V2-000U-A99/259-1572-ND/2757810 MC30060V2-000U-A99] (preferred option)
  
 
{{Community}}
 
{{Community}}

Latest revision as of 08:39, 1 August 2019

1 LimeSDR-Mini Boards

The LimeSDR-Mini is low-cost software defined radio board. LimeSDR-Mini development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Intel’s MAX 10 FPGA and Lime Microsystems transceiver.

LimeSDR-Mini v1.1 board

LimeSDR-Mini v1.1

2 Features and Specifications

Feature Description
RF Transceiver Lime Microsystems LMS7002M MIMO FPRF
FPGA Intel MAX 10 (10M16SAU169C8G 169-UBGA)
USB 3.0 controller FTDI FT601
Oscillator Rakon RTX5032A @40.00MHz
Continuous frequency range TBD
Bandwidth TBD
RF connection 2 SMA connectors (1 RX, 1 TX)
Power Output (CW) TBD
Status indicators Programmable LEDs
Dimensions 69mm x 31.4mm


3 Getting Help

If you have questions, the MyriadRF Discourse is a best place to ask for help.


4 Documentation

5 USB Drivers

Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.

6 Software

7 FPGA Binaries

Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):

8 Board Design Files

Here are links to the schematic, PCB project and BOM:

LimeSDR-Mini v1.1

9 Additional Components

Here is a list of additional components to be used with LimeSDR-Mini board.