Difference between revisions of "LimeSDR-Mini"
(→Documentation) |
AndrewBack (Talk | contribs) (→Additional Components) |
||
| (7 intermediate revisions by 4 users not shown) | |||
| Line 41: | Line 41: | ||
== Documentation == | == Documentation == | ||
| − | |||
* [[LimeSDR-Mini_v1.1_hardware_description | LimeSDR-Mini v1.1 hardware description]] | * [[LimeSDR-Mini_v1.1_hardware_description | LimeSDR-Mini v1.1 hardware description]] | ||
| + | * [[LimeSDR-Mini_v1.2_hardware_description | LimeSDR-Mini v1.2 hardware description]] | ||
* [[LimeSDR-Mini_JTAG_cable_adapter| LimeSDR-Mini JTAG cable adapter]] | * [[LimeSDR-Mini_JTAG_cable_adapter| LimeSDR-Mini JTAG cable adapter]] | ||
* [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU | * [[LMS7002Mr3_Calibration_Using_MCU|LMS7002M (Mask 1) Transceiver Calibration]] - LMS7002Mr3 calibration guide, using internal MCU | ||
| − | * [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks. | + | * [[LimeSDR Made Simple]] - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks (note that not all examples will work with the Mini, e.g. those using the waveform player) |
| − | * [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3. | + | * [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Data_Sheet_v3.2r00.pdf LMS7002M Datasheet (PDF)] - LMS7002M RF transceiver datasheet |
* [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide | * [https://github.com/myriadrf/LMS7002M-docs/blob/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf LMS7002M Programming and Calibration Guide (PDF)] - LMS7002M programming and calibration guide | ||
| + | * [[LimeSDR-Mini-Phase-Noise | LimeSDR-Mini v1.2 phase noise measurements]] | ||
== USB Drivers == | == USB Drivers == | ||
| Line 64: | Line 65: | ||
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream): | Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream): | ||
| − | * FPGA [https://github.com/myriadrf/LimeSDR-Mini_GW/blob/master/LimeSDR-Mini_bitstreams/LimeSDR-Mini_lms7_trx_HW_1. | + | * FPGA [https://github.com/myriadrf/LimeSDR-Mini_GW/blob/master/LimeSDR-Mini_bitstreams/LimeSDR-Mini_lms7_trx_HW_1.2_auto.rpd gateware] |
== Board Design Files == | == Board Design Files == | ||
| Line 82: | Line 83: | ||
* Tested fans: | * Tested fans: | ||
** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V1-000U-A99/259-1545-ND/2757809 MC30060V1-000U-A99] | ** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V1-000U-A99/259-1545-ND/2757809 MC30060V1-000U-A99] | ||
| − | ** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V2-000U-A99/259-1572-ND/2757810 MC30060V2-000U-A99] ( | + | ** [http://www.digikey.com/product-detail/en/sunon-fans/MC30060V2-000U-A99/259-1572-ND/2757810 MC30060V2-000U-A99] (preferred option) |
{{Community}} | {{Community}} | ||
Latest revision as of 08:39, 1 August 2019
Contents
1 LimeSDR-Mini Boards
The LimeSDR-Mini is low-cost software defined radio board. LimeSDR-Mini development board provides a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs using Intel’s MAX 10 FPGA and Lime Microsystems transceiver.
LimeSDR-Mini v1.1 board
2 Features and Specifications
| Feature | Description |
|---|---|
| RF Transceiver | Lime Microsystems LMS7002M MIMO FPRF |
| FPGA | Intel MAX 10 (10M16SAU169C8G 169-UBGA) |
| USB 3.0 controller | FTDI FT601 |
| Oscillator | Rakon RTX5032A @40.00MHz |
| Continuous frequency range | TBD |
| Bandwidth | TBD |
| RF connection | 2 SMA connectors (1 RX, 1 TX) |
| Power Output (CW) | TBD |
| Status indicators | Programmable LEDs |
| Dimensions | 69mm x 31.4mm |
3 Getting Help
If you have questions, the MyriadRF Discourse is a best place to ask for help.
4 Documentation
- LimeSDR-Mini v1.1 hardware description
- LimeSDR-Mini v1.2 hardware description
- LimeSDR-Mini JTAG cable adapter
- LMS7002M (Mask 1) Transceiver Calibration - LMS7002Mr3 calibration guide, using internal MCU
- LimeSDR Made Simple - Demystifying using SDR in the real world and programming a simple example with confidence, through bite sized chunks (note that not all examples will work with the Mini, e.g. those using the waveform player)
- LMS7002M Datasheet (PDF) - LMS7002M RF transceiver datasheet
- LMS7002M Programming and Calibration Guide (PDF) - LMS7002M programming and calibration guide
- LimeSDR-Mini v1.2 phase noise measurements
5 USB Drivers
Windows only, OSX and Linux users do not need to install drivers for USB support. Follow driver installation instructions in Driver Installation Documentation.
6 Software
7 FPGA Binaries
Here are the links to pre-compiled MCU firmware and FPGA gateware (bitstream):
- FPGA gateware
8 Board Design Files
Here are links to the schematic, PCB project and BOM:
LimeSDR-Mini v1.1
9 Additional Components
Here is a list of additional components to be used with LimeSDR-Mini board.
- U.FL to SMA adapter cable
- Tested fans:
- MC30060V1-000U-A99
- MC30060V2-000U-A99 (preferred option)
|
|||||||||||||||||||||
